□
Are ToughBuilt Locking Drawers Worth It? Brand Comparison — Shadow Foam Doorgaan naar inhoud
We pay all duties for you - No surprise fees at checkout!
We pay all duties for you - No surprise fees at checkout!
Are ToughBuilt Locking Drawers Worth It? Brand Comparison

Are ToughBuilt Locking Drawers Worth It? Brand Comparison

Are ToughBuilt Locking Drawers Worth Buying? StackTech vs Milwaukee, DeWalt and More

ToughBuilt’s new StackTech locking drawers address one of the biggest complaints about its original line of drawer toolboxes: you could organise your tools, but you couldn’t lock the drawers.

The updated range changes that with an integrated locking mechanism, seven drawer configurations and more usable space than before. But is it too little, too late for Toughbuilt? There are plenty of premium toolboxes and drawer configurations on the market currently from all the major brands, and some alternatives cost considerably less.

So, are ToughBuilt locking drawers worth buying, or would your money go further with Milwaukee Packout, DeWalt ToughSystem or another modular toolbox system?

In our ToughBuilt locking drawer toolbox review, we examined the locking system, compared drawer space and broke down the prices. Here is how the figures stack up—and why Shadow Foam inserts are the finishing touch if you decide to invest.

All prices and comparison figures below are  accurate as of 25 September 2026.

What has changed with ToughBuilt’s locking drawers?

The headline improvement in this range of Toughbuilt stcktech drawer boxes is a metal locking mechanism built into the front corner rail. Move the latch to lock the drawers, then add a suitable padlock to prevent it being released.

In our review, the engaged lock held the drawers firmly, without the movement you might expect from a loose retaining bar. The mechanism sits within the toolbox body, and a colour indicator makes its status easy to check.

That gives ToughBuilt an appealing advantage over the separate locking-bar arrangements common for Milwaukee Packout and Qbrick systems. There is no extra bar to remove, stow or misplace, which also has the added benefit of not taking away internal space for the drawers themselves.

There is a small compromise: the padlock protrudes from the corner and can interfere with certain accessory arrangements. If you carry a long level, for example, you may need to rethink where it sits on the stack.

The biggest benefit is the additional drawer space this new locking mechanism afford Toughbuilt. With the locking mechanism housed outside of the drawers themselves, this frees up space in the interior drawers themselves.

For anyone planning a closely packed Shadow Foam layout, removing that front obstruction from the original lineup of Stacktech drawer boxes is a useful improvement.

ToughBuilt vs other brands: which has the biggest drawers?

A toolbox can look substantial from the outside without giving you the most useful space inside. Our review compared drawer floor area to show how much room is available for your tools.

Toolbox system Drawer floor area stated Position in this comparison
Qbrick System ONE 0.134 m² Largest stated area
Milwaukee Packout 0.132 m² Second
DeWalt ToughSystem 0.128 m² Joint third
ToughBuilt StackTech 0.128 m² Joint third
Keter Stack & Roll / Erbauer Connecx 0.117 m² Smaller stated footprint
Bunker 0.110 m² Smallest stated area in this group

Source: Whattoolbox. Areas are reproduced as rounded in the review. These are floor areas, not storage volumes; drawer height and internal obstructions also affect what fits.

ToughBuilt does not win this comparison on floor area alone. Qbrick and Milwaukee provide slightly more area in the figures quoted, while DeWalt matches ToughBuilt’s rounded result.

The stronger case for StackTech is the combination of useful space, its locking mechanism and access to the whole drawer. Against the smaller footprints quoted for Keter, Erbauer and Bunker, it also gives you more room to plan a tool layout.

Full-extension drawers: a practical reason to pay more

One of the standout features in the review is true full extension. ToughBuilt’s drawers pull out far enough to expose the back of the drawer, rather than leaving a strip hidden beneath the housing.

That matters when you want a carefully organised toolkit. A tool at the back should be as easy to remove as one at the front, particularly when it sits in a fitted Shadow Foam Insert.

Toughbuilt states an 11.3kg load capacity per chest drawer, supported by metal slides. Its appeal is the combination of load capacity and full access, rather than capacity gained by limiting how far a drawer opens.

ToughBuilt locking drawer prices: how much do they cost?

Price is the biggest obstacle to recommending ToughBuilt to everybody. It is an investment and there is no way around that, but it really depends on where you attribute value in a toolbox purchase. Is it durability or space, compatibility or brand allegiance?

Source: Whattoolbox

ToughBuilt vs Milwaukee Packout vs DeWalt ToughSystem: price comparison

Let's start with price. The cleanest price comparisons we could find are the two-drawer and three-drawer chest units, plus the single-drawer rolling box.

Configuration compared ToughBuilt StackTech Milwaukee Packout DeWalt ToughSystem
1-drawer rolling box £285 £225 No comparable option identified in the review
2-drawer chest £230 £140 £100
3-drawer chest £238 £145 £115–£120

Source: Whattoolbox

At the prices quoted, ToughBuilt’s single rolling drawer costs £60 more than the Milwaukee alternative.

Now, a convincing case could be made for paying that premium for Toughbuilt if you value the slide-mounted drawer, additional support wheel and integrated locking mechanism. For someone carrying heavy, bulky equipment, those features may matter more than the initial saving on cost.

DeWalt is clearly attractive if the priority is affordability drawer storage. Milwaukee also offers a substantial saving over ToughBuilt in all our comparisons.

StackTech’s case rests on its overall construction, integrated locking arrangement, accessory rails and the range of drawer configurations available. Those are practical reasons to spend more, but they need to matter to your work.

The verdict: are ToughBuilt locking drawers worth buying?

Yes—if you want premium drawer storage and will use the features you are paying for.

Our verdict is strongly positive about the locking mechanism, construction, full-extension drawers and versatility. ToughBuilt has addressed a major weakness of its original drawers while making the interior easier to organise.

It is especially compelling if you already own StackTech, want a drawer-based rolling setup, or carry tools that benefit from the deep drawer options.

But it is not the automatic winner for every buyer. DeWalt offers a strong value argument at the quoted prices. Milwaukee provides slightly more drawer floor area in the comparison and cheaper options in the configurations priced. Qbrick leads the quoted floor-area figures and offers an extensive drawer range.

Choose ToughBuilt because its locking system, access and configurations solve your storage problems. That is where the extra investment makes sense.

Complete your ToughBuilt locking drawers with Shadow Foam inserts

Once you have invested in better drawers, make the inside work just as well as the outside.

Shadow Foam inserts are the ultimate ToughBuilt locking drawer upgrade: they let you create a fitted home for your own tools, rather than leaving them loose in an expensive box.

A well-planned layout helps you find equipment quickly, keeps tools separated and makes an empty space obvious when something has not been returned. That can save time on the job and help you catch a missing tool before leaving site.

The new locking drawers also provide a better starting point for foam organisation. The updated insert shape makes use of the revised interior without the old front trapezoid cut-out.

The same updated Shadow Foam insert shape fits all the ToughBuilt locking drawers covered in the review, so you can create a consistent setup across different units. Choose foam depth to suit the tools and available clearance, then cut and peel individual recesses around your equipment.

Put drivers and pliers in a shallow drawer, measuring tools in another, and power tools with their accessories in a deeper compartment. Full-extension access helps you make practical use of the layout right to the back.

ToughBuilt gives you the drawer system. Shadow Foam helps turn it into an organised toolkit built around the way you work.

Upgrade your ToughBuilt locking drawers with Shadow Foam inserts and give every tool a place.

Volgend artikel 15 Best Tools for Apprentices in 2026: The Ultimate Apprentice Tool Kit Guide

Vergelijk Producten

{"one"=>"Selecteer 2 of 3 items om te vergelijken", "other"=>"{{ count }} van 3 items geselecteerd"}

Selecteer het eerste item om te vergelijken

Selecteer tweede item om te vergelijken

Selecteer derde item om te vergelijken

Vergelijken