Festool Værktøjskasse Organiser | Shadow Foam Spring til indhold

Festool Tool Organiser

Do you want to put an end to the rattling sound in your Festool toolbox? Or perhaps you want to protect your tools so you don't need to repair or replace them as often? Whatever the case might be - you've come to the right place.


Shadow Foam's Festool tool organisers are made of 100% polyethylene, which is renowned for its strength, flexibility, and durability. It's also resistant to most common chemicals, UV, and water, making it the perfect tool organiser, regardless of the weather conditions that you'll be working in.


Browse through this page and find the Festool tool inserts for your particular toolbox or keep reading to learn about the unique benefits our one-of-a-kind inserts have to offer.

Unique Cut-and-Peel Festool Storage Tool Organisers

There isn't a product quite like our Festool tool organisers. Here are some of the key benefits our unique Festool toolbox inserts have to offer:

Protect Your Tools From Getting Damaged

The Germany-based tool manufacturer Festool is known for producing some of the highest-quality tools on the market, which aren't cheap to repair or replace. So, if you want to make the most of them, it's wise to ensure that they are secure and protected.


When you use our Festool inserts, each of your tools will have its place. As a result, during vehicle transport, they won't rattle inside the toolbox and make contact with each other, which will prevent them from getting damaged. And by the way, this goes for all of your tools, regardless of whether it's a screwdriver or a power drill.

Lay Out Your Tools The Way You Want To

The large majority of Festool organisers give you little to no control over how you get to lay out your tools inside your toolbox. That's not the case with our Festool inserts. When you receive your insert, you will be the one who decides how and where each of your tools will be stored.


To do that, you need to lay the tool where you want it to be stored and cut into the foam around the shape of the tool. Then, all you need to do is peel back the shape you've just cut out and put your tool in its custom-made slot. That way, not only will each of your tools have a proper place in your toolbox, but you'll save a ton of time as you will know exactly where to find each one of your tools.

Water, Chemical, & UV Resistant

Since all Shadow Foam inserts and sheets are made of 100% polyethylene, they are great at repelling water, chemicals, and ultraviolet light. The reason for that is because polyethylene's chemical composition and molecular structure greatly contribute to its resistance to various environmental factors.


The benefit of that is obvious - you can use your toolbox and keep your tools protected in a variety of weather conditions. What's more is that the foam and the cutouts for your tools won't lose their shape, feel, or look if it rains or if the insert is exposed to chemical or UV light while you're working away.

Compatible with:
Compatible with:
Twin Pack
Starting at
£
19.99
 
£
Twin Pack
Starting at
£
19.99
 
£
Compatible with:
Compatible with:
Twin Pack
Starting at
£
24.99
 
£
Twin Pack
Starting at
£
21.99
 
£
Compatible with:
Compatible with:
Twin Pack
Starting at
£
29.99
 
£

Easy to Maintain & Keep Clean

If you've owned a Festool storage box for a while, you'll know how messy and dirty it can get over time. What's more is that keeping your toolbox clear of any mess, especially when your tools aren't organised can be a time-consuming process, which is why some people don't bother to clean their toolbox at all.


When you make use of our Festool organiser, keeping your toolbox clean and presentable is extremely easy. When you notice that your inserts are due for a clean, take your tools out, and simply wipe away the dust and debris. It's as easy as that.

HCFC-Free & Completely Odourless

Polyethylene is composed solely of hydrogen and carbon atoms and lacks common HCFCs, such as chlorine and fluorine, which are renowned for being toxic to our environment. As a result of that, polyethylene doesn't release the above-mentioned compounds during production, use, and disposal, making it a great environmentally-friendly choice of organiser for your toolbox.


What's more, is that the lack of volatile compounds in polyethylene also makes our inserts completely odourless. In other words, you no longer have to deal with the toxic and lingering smells that build up inside your toolbox when it's not in use.

Designed With Affordability In Mind

High-quality Festool tool organisers aren't cheap. When we founded Shadow Foam over a decade ago, we didn't just want to create the highest-quality organiser on the market, but one that is also affordable.


If you browse through this page, you'll see that our Festool organisers start at just £14.99 inc VAT, making them a no-brainer for anyone who wants to protect the look and functionality of their tools, accessories, and equipment.

Designed for Every Contractor and DIY-er

Whether you're a contractor working on a construction site or own a DIY workshop, the truth is that everyone with a Festool toolbox can benefit from our unique cut-and-peel organisers. If you want to protect your tools, big or small, our inserts can help you do that.


All you have to do is find the insert that is compatible with your toolbox or order a standard Shadow Foam sheet and cut it to the footprint of your toolbox. Then, place your tool on the foam, cut around the shape of your tool, and simply peel. That's it. Keeping your expensive tools organised and protected has never been easier. Order your Festool storage inserts today and put an end to your messy toolbox.

FAQS

Our Festool toolbox organisers don't have set dimensions. The reason for that is because each of our inserts is designed to fit a specific model of Festool toolbox. So, what you need to check before buying a Shadow Foam Festool toolbox organiser is the model of your toolbox. Then, you can find the insert that is designed for it.


In terms of depth, our Festool toolbox organisers are available in 30mm and 50mm. That way, whether you plan on storing screwdrivers or bulkier tools like power drills, you can easily keep them perfectly protected, regardless of their size or shape.


Please note that while we do have inserts for most Festool toolbox models, we might not hold stock for all of them. That's not a problem though, as you can easily get a standard Shadow Foam sheet, which comes in 30mm, 50mm, and 70mm depth and cut it to the footprint of your specific Festool case or drawer.

The Shadow Foam Festool inserts are extremely durable. This is largely because our inserts are made of 100% polyethylene, which is widely known for its excellent resistance to wear and tear and ability to endure impact. On a chemical level, polyethylene has a closed-cell structure, which provides a high level of resilience, ultimately preventing the foam from breaking down easily over time.


Besides being able to handle impact, polyethylene also offers resistance to most common chemicals, ultraviolet light, and water, further contributing to the longevity of your Festool organisers. If you read through the reviews that our customers have left about our Festool inserts, you'll get a better idea of what you can expect in terms of quality and longevity.

Unlike Festool systainers, which you can buy directly from the manufacturer, our toolbox organisers don't have any pre-set compartments and that's the beauty of them. Each insert is like a blank canvas and you are the one that decides where and how you want each of your tools and accessories to be positioned.


To do that, simply place each of your tools on the insert, and cut around it. Then, peel off the shape that you've just cut around. And just like that, your tools now have their own dedicated place in your Festool toolbox.

Yes, they are. According to our own testing and customer reviews, our Festool toolbox organisers do an excellent job in wet or abnormally humid conditions. The reason why our Shadow Foam inserts are so good at resisting water is because of the material they're made out of - 100% polyethylene.


We won't go all sciency on you, but in most basic terms, polyethylene has a different molecular structure to water. Water is a polar molecule, and is attracted to other polar molecules. Polyethylene, on the other hand, has a non-polar molecular structure, meaning it'll naturally repel water rather than absorb it.


As a result, any contact that your shadow foam insert makes with water will be rejected rather than absorbed - keeping your insert dry. In other words, when the insert comes into contact with water, it won't turn into a soft sponge that ends up holding water.

Each type of Shadow Foam insert is designed to fit a specific Festool toolbox model. To find the right insert for you, you need to know exactly what model your Festool toolbox is. Please note that we don't always stock up on inserts that cover all models of Festool toolboxes.


If you are unable to find an insert that would suit the footprint of your specific toolbox, that's not a problem. We offer standard Shadow Foam sheets, which you can cut to the unique dimensions of your tool case. Don't worry - it'll look just as good.

Sammenlign produkter

{"one"=>"Vælg 2 eller 3 varer at sammenligne", "other"=>"{{ count }} af 3 varer valgt"}

Vælg første vare til sammenligning

Vælg andet element til sammenligning

Vælg tredje vare til sammenligning